Pico M300 Series
2" or Larger Pipe Sizes
300 Watt Maximum Output
Soar Hydropower’s M300 Pico hydro turbine series are designed for power generation in new or existing water networks and can be installed on any two inch or larger pipeline. Installation is simple and systems are plug-and-play.
With minimal site prep requirements they are ideal for both local and off-grid battery charging applications. Common applications are installed in parallel with existing control or pressure reducing valves.
Pico Hydro turbines are ideal for running Remote terminal units (RTUs), SCADA systems, monitoring equipment, sump pumps, lighting, blowers, fans, and pressure management devices. Systems are configured 24VDC with a maximum power output of 300 Watts. Generated power can be used as it is generated and excess is stored through a sophisticated battery charging system. When fully charged, the turbine automatically shuts down to prolong system life.
There are two versions of the M300 Pico Turbine. The M300-60 is engineered for higher head applications (up to 60 PSI) while the M300-30 is engineered for lower head (up to 30 PSI). Power output for both models depends on site specifics but both share the same 300W maximum potential.
Soar’s Micro Hydro Controller pairs seamlessly with the M300 series hydro turbines. With an intuitive interface the MHC2500 is ready to manage power generation out of the box.
The controller is intended to be used with 24 volt battery banks. The MHC2500 is compatible with all turbine generation systems up to 300 watts and charges an external battery bank that can be used actively or as needed.
M300 picro hydro turbines are frequently installed in water distribution systems across pressure reducing valves. They can be retrofit to existing Cla-Val valves, Singer valves, or many other common control valves. In these applications the M300 generates enough power to operate equipment such as control valves, communication equipment, or data logging equipment.